Propel Quality Measurement

Tecpel Test and Meausrement Home Page

  Tecpel test and Measurements product guide
 

Digital Clamp-on Meter
1500A AC/ 2000 A DC + Bar Graph

True R.M.S.
ModelGDCM 2608

This Tecpel® clamp meter dcm-2608 is a handheld 4000-count clamp multimeter that is designed for use in

the laboratory, field servicing, at home, and any circumstance where high current measurement is required.

The rugged clamp meter from Tecpel® is built with a design of finger guard which ensures users operating

this great tool under a safety situation; a rugged plastic case that is a shock resistant and fire retardant;

and electronic overload protection for all functions and ranges. In addition, a soft carrying case is available

for easy portability of the meter and avoiding damage.


Digital Clamp-on Meter

Features of DCM-2608

1. 3 3/4 digit display (4000 counts)
2. AC current up to 1500A;DC current up to 2000A
3. AC voltage up to 750V;DC voltage up to 1000V
4. Resistance up to 40M[
5. Frequency up to 400kHz
6. Capacitance measurement
7. Audible continuity test / Diode test
8. Over range indication
9. Max/Min recording mode
10. Relative mode to read offset values (Zero [key)
11.Peak hold for transient measurement
12.Confirm to the IEC-1010-1 ,
UL1244/UL3111, CE standard
13. Hand guard protection
14. Carrying case.

@

SPECIFICATIONS        CE  Mark Safety Approval

 

  • DCM 2608 SPECIFICATION
  • Display: 3 3/4 digit(4000 counts), 9999 counts(Frequency Mode), 42 segment Analog bar graph and function/units sign annunciators.
  • DC Voltage Ranges:
  • 400mV,4V,40V,400V,1000V, (0.5%+1dgt)
  • AC Voltage Ranges:
  • 400mV,4V,40V,400V,750V,(1.5%+4dgts)
  • AC Current Ranges:
  • 200A,1500A,(1.5~5%+5dgts)
  • DC Current Ranges: 200A,1000A,(1.5~5%+5dgts)
  • Resistance Ranges: 400[,4k[,40k[,400k[,4000k[,40M[, (1.0%+4dgts)
  • Continuity Test: Audible indication<40[/Diode Test 0.6mA,approx.
  • Polarity: Automatic (-) negative polarity indication.
  • Overrange indication: MSD (Most Significant Digit) blinks.
  • Lower Batery indication: the "battery sign" is displayed when the battery voltage drops below accurate operating level.
  • Measurement rate: 2/sec. nominal 1/sec. Capacitanc and Frequency mode. 20/sec. Analog display.
  • Operating Environment: 0 &degC to 50 &degC at < 70% RH
  • Storage Environment: -20 &degC to 60 &degC at 80% RH
  • Temperature Coefficient: 0.1 x (specified accuracy)/ &degC ( < 18 &degC or > 28 &degC)
  • Auto Power Off: 30 minutes after rotary switch or mode changes.
  • Altitude 6561.7 Feet (2000M)
  • Power : One standard 9-Volt battery, NEDA 1604, IEC 6f22, jis 006P
  • Battery Life: 100 Hours typical with alkaline battery.
  • Jaw Opening Capacity: 57 mm conductor , 70 x 18 mm bus bar.
  • Weight: Approx. 18.9 OZ/ 540 g grms (including battery).
  • Dimensions: 10.9"x4.0"x1.9" (277x102x49mm)
  • Accessories: Test leads; soft carrying case, battery, and owners manual

 

@

 

@@


 

 

 

 

 

 

TECPEL CO., LTD.

E-MAIL: sales@tecpel.com ; oka@oka.com.tw
Tel : 886 (2)2737-5866 FAX : (02)2737-3343
Web-site: http://www.tecpel.com; http://www.oka.com.tw

 


Tecpel-Product Guide       TECPEL - Home page        Tecpel-Prouduct Guide