Analog 50MHz Oscilloscope


SPECIFICATIONS CE Mark Safety Approval
CRT	Type	6-inch rectangular type with internal graticule; 0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)
	Phosphor	P31
	Accelerating Potential	12 kV
	Illumination	Continuously adjustable
	Z-axis input	Input Impedance : Approx. 5kΩ
		Sensitivity : Above 3Vp-p
		Bandwidth : DC ~ 5MHz

VERTICAL SYSTEM	Sensitivity	5mV ~ 5V/DIV +3%, 1mV ~ 2mV/DIV +5%
	Bandwidth	DC ~ 50MHz
	Bandwidth	DC ~ 15MHz at 1mV ~ 2mV/DIV
	Rise Time	7nS (23.3nS at 1mV ~ 2mV/DIV)
	Signal Delay	Leading edge can be monitored
	Input Impedance	Approx. 1MΩ
	Input Coupling	AC, DC, GND
	Vertical Mode	CH1, CH2, DUAL, CH2 INV, ADD.(Dual automatic switching ALT and CHOP)

HORIZONTAL SYSTEM	A (main) Sweep Time	0.1µS ~ 0.5S / DIV+3%, 100nS ~ 50mS / DIV+5% (x 10MAG), 10nS ~ 50nS/DIV+8% (x 10MAG)
	B (delay) Sweep Time	0.1µS ~ 0.5mS / DIV+3%, 100nS ~ 50µS / DIV+5%(x 10MAG), 10nS ~ 50nS / DIV+8% (x 10MAG)
	Delay Time	1µS ~ 5mS, +5%
	Delay Time Jitter	Better than 1:10000

TRIGGER	Trigger Mode	AUTO, NORM, SINGLE
	Trigger Source	CH1, CH2, ALT, LINE, EXT
	Trigger Coupling	AC, DC, HR, REJ, TV
	Trigger Slope	"+" or "-"

X-Y OPERATION	Sensitivity	5mV ~ 5V / DIV+ 4%
	X-axis Bandwidth	DC ~ 2MHz
	Phase Error	3º or less from DC ~ 100kHz

OUTPUT SIGNAL	Trigger Signal Output	Voltage : approx. 50mV / DIV into 50Ω
OUTPUT SIGNAL	Calibrator Output	1kHz Squarewave, 2Vpp+2%

POWER SOURCE		AC 100V / 120V / 220V / 230V + 10%, 50 / 60Hz

ACCESSORIES		Power cord x 1; Instruction manual x 1 ; Probes(10:1/1:1)x2

DIMENSIONS & WEIGHT		310(W) x 150(H) x 455(D) mm；Approx. 8.2kg

GOS-653G
	FEATURES :
	50 MHz, Dual Channel
	Delayed Sweep
	Built-in Delay Line
	TV Synchronization
	Z axis input
	ALT Triggering Function
	Hold off Function
	Trigger level lock function
	CH1 output