☆ Measure current without disconnecting circuit under test
☆ AC/DC 600A capability
☆ Dual Hall-effect sensors
☆ Accuracy DC:±2%+2A AC: ±3%+2A (50~400Hz)
☆ For use with any multi-meter at 200mV or 2V ranges for direct readout.
Input impedance at least 1MΩ
☆ Power on indicating
☆ Zero adjustment knob to compensate the hysteresis effect in
☆ Transformer ratio:1000:1
☆ Output 1mV/A
☆ Jaw opening capability:30mm conductor
☆ Confirm to Safety:IEC 1010-1, IEC 1010-2-032,UL,CE approved.
☆ Low battery indication
CE Mark Safety Approval
600A DC or AC
±(2% reading +2A)
Frequency Response (AC):
50Hz to 400Hz
Maximum Conductor Size:
11 oz. (290g)
Battery, owners manual
CA-06 Adapter (Option)
BNC- Female 4mm Banana post adapter for receiving Signal output from CA-60 and able to be monitored by oscilloscope.
Use LF-180 and TL-19 together to connect CA-600 with any oscilloscope
to monitor low frequency signal.
LF-180 BNC Probe- 4mm Male Banaba connector
TL-19 Female 4mm to Female 4mm socket for connecting 4mm Banana male Jack